Finishing and clean up

Clean Up

1. Power down mill

2. Turn off dust collector

3. Use a broom to sweep debris from work area (Do not use compressed air to blow material around)

4. Use a vacuum to clean the machine and area around it.

5. Remove the key from spindle bypass

6. All bits and tools go back into their pedestals (Warning: bit will be extremely hot right after cutting)

7. Leftover material should be put away. Don’t leave it on the machine or around the machine.

᛫  recyclable material can go into the Fablab recycle bin.

8. You do not have to shut down the computer!